Print queue

Auto-combine and auto-start: full beds by themselves

Prints of one filament that fit one bed become a plate, are sliced as one job and start on a free printer with that filament loaded, without pressing Go.

3 min read

Switch Auto-combine on in the Print Queue header. Every minute, prints of the same filament and the same print settings that wait for a printer are laid out together on one bed when they fit, most urgent first. A print pinned to a printer only rides with prints for that printer.

3MF prints

Single-colour 3MF files join a plate as their model, placed as their project placed them. A multi-colour 3MF can be the plate’s project with single-colour prints around it; two multi-colour 3MFs never share a plate, and the plate card says why.

Starting by themselves

With Auto-print on (Print Queue header), a sliced plate starts on an idle printer of its model with its filament loaded, the same as a single print. The Go button on a plate card is for starting one by hand, for example on a printer of your choice. Click the plate’s title to open its prints.

Left out: prints on hold or with a reason on the card, pre-sliced files, multi-plate projects and personalised prints whose letters are still being made.

Print queue · 5 minHow the Print Queue works Print queue · 4 minAuto-print: let the queue start prints by itself Print queue · 3 minChoose the printer and change the order of the queue Print queue · 3 minCancel a task, or stop a print that has already started

Find out which of your products is losing money.

Connect one shop and one printer. The first finished job tells you its real cost.

Start freeNo card. Read-only to start. Nothing changes on your printers.